A double cylinder deadbolt is a deadbolt that needs a key on both the outside and the inside. It can stop someone from breaking nearby glass and reaching in to turn a thumbturn, but it also means nobody can unlock that door from inside without the key, which is a serious concern in a fire. Local code and rental rules vary, so verify before installing one.
Below you will find how a double cylinder deadbolt works, when it is worth considering, the egress trade-off explained without drama, and alternatives that keep a door both secure and easy to exit.

What Is a Double Cylinder Deadbolt?
A standard deadbolt has a key cylinder on the outside and a thumbturn on the inside. You lock and unlock it from inside by twisting the thumbturn. A double cylinder deadbolt replaces that thumbturn with a second key cylinder, so the bolt moves only with a key from either side.
Mechanically, the bolt, latch housing and strike are much the same as on a single cylinder model. The difference is the interior trim. That small change is what makes a double cylinder deadbolt both useful and controversial.
Double cylinder deadbolt vs other deadbolt types
| Type | Inside operation | Glass reach-through risk | Exit in an emergency | Typical use |
|---|---|---|---|---|
| Single cylinder | Thumbturn, no key | Higher if glass is within reach | Simple, no key needed | Most front and side doors |
| Double cylinder deadbolt | Key required | Lower | Depends on finding the key | Doors with glass near the lock, where rules allow |
| Captured-key or lockable thumbturn | Thumbturn that can be locked with a key when away | Lower when locked out | Thumbturn works when left unlocked | Homes wanting both options |
| Single cylinder plus glass upgrade | Thumbturn | Reduced by film, laminated or tempered glass | Simple, no key needed | Sidelights, French doors, door glass |
A few terms worth knowing
- Cylinder: the part with the keyway. It turns a tailpiece or cam that moves the bolt.
- Thumbturn: the small knob on the inside of a single cylinder deadbolt.
- Throw: how far the bolt extends into the frame. Many residential deadbolts throw about one inch.
- Backset: the distance from the door edge to the center of the lock hole, usually 2-3/8 or 2-3/4 inches.
- Strike: the metal plate in the frame that receives the bolt.
These details matter when you swap a single cylinder model for a double cylinder deadbolt, or the reverse, because the new lock has to match the existing door prep.
Why People Choose a Double Cylinder Deadbolt
The logic is about glass. Many West Valley homes have a decorative glass panel in the front door, a narrow sidelight next to it, or French doors to the backyard. If someone breaks that glass and the thumbturn is within arm’s reach, a single cylinder lock can be opened from outside in seconds. A double cylinder deadbolt removes the thumbturn, so breaking the glass alone does not unlock the door.
Other reasons homeowners mention include a detached casita or storage room that nobody sleeps in, a gate-side door near a street, or a home that sits empty for part of the year while the owners are out of state for the summer.
When a double cylinder deadbolt makes sense
Use these criteria as a starting point, not a final rule:
- There is breakable glass within reach of the lock, roughly an arm’s length, including sidelights.
- Nobody sleeps in the space, or there is another easy exit that does not require a key.
- Local code, any HOA rules and your lease (if you rent) allow a double cylinder deadbolt on that door.
- Everyone in the home, including children, older relatives and guests, knows where the key is and can use it.
- Upgrading the glass or switching to a lockable thumbturn has been considered and ruled out.
If any of these do not hold, a double cylinder deadbolt is probably the wrong tool for that door.
The Fire Egress Trade-Off of a Double Cylinder Deadbolt
“Egress” simply means the way out. In a house fire, smoke can fill a hallway and reduce visibility, and people often wake up disoriented. A door that needs a key to open from inside adds a step at the worst possible moment. That is the core concern with a double cylinder deadbolt, and it is why fire safety organizations generally encourage doors that open from inside without a key. The U.S. Fire Administration and the National Fire Protection Association both publish home escape planning information.
This is not a reason to panic about an existing lock. It is a reason to make a deliberate choice and, if you keep a double cylinder deadbolt, to plan for how the household gets out.
What codes, landlords and HOAs may say
Model codes such as those published by the International Code Council include language about exit doors being openable from inside without keys or special knowledge. How that applies to a specific home depends on which code edition your city adopted, local amendments, the age of the house and the type of door. Phoenix, Glendale, Avondale, Goodyear and Tolleson each administer their own building codes.
Leases and property management policies may add their own limits on a double cylinder deadbolt, especially on bedroom doors or the primary exit. Nothing in this article is a code compliance determination. Before installing one, check with your local building or fire official and read your lease or HOA documents.
If you keep a double cylinder deadbolt
- Keep a dedicated key near the door, out of reach from any glass, and never move it.
- Show every household member, including children old enough to help, where it is.
- Include that door and its key in your family escape plan and practice it.
- Make sure at least one other exit opens without a key.
- Leave the inside unlocked while people are home, if your household agrees.
The weak point of this routine is human: keys get borrowed, moved for cleaning or dropped in a drawer. If you doubt the routine will last, that is a strong sign to choose a different lock.
Safer Alternatives to a Double Cylinder Deadbolt
Most people choosing a double cylinder deadbolt are really solving a glass problem. These options address the glass or the thumbturn without making the door key-only from inside.
Single cylinder deadbolt with glass upgrades
Security window film adhered to the glass can make it much harder to break through cleanly. Laminated glass, the type with a plastic interlayer, holds together when struck. Replacing a sidelight or door lite with laminated glass is a job for a glass company, but it lets you keep a normal thumbturn. In west Phoenix, choose films rated for intense sun so they do not bubble or peel after a few summers.
Captured-key or lockable thumbturn deadbolts
Some manufacturers make deadbolts with a thumbturn that can be locked or removed using a key. When the family is home, the thumbturn works normally. When the house is empty, it can be locked so a reach-through does not work. Availability, keying options and features vary by brand, so ask a locksmith which models fit your door and key system. Whether these meet local rules is also a question for the code official.
Reinforce the frame and strike
Many forced entries ignore the glass and go after the jamb. A heavy-duty strike with long screws into the framing, solid door construction and a properly aligned bolt help no matter which deadbolt you pick. Our guide to the best deadbolts for Phoenix homes covers grades and strike details.
Double Cylinder Deadbolt Decisions for Rentals and Families
Landlords who installed a double cylinder deadbolt years ago may want to review it during turnover, since tenants rarely know about the key-on-both-sides design until they need it. Check what your local rules and your lease templates say. If you are already changing locks between tenants, our article on rekeying during tenant turnover in Phoenix explains the timing.
Renters should not swap a landlord’s lock without written permission. If a double cylinder deadbolt worries you, ask the landlord about a single cylinder replacement or a lockable thumbturn.
Short-term rental hosts face a similar question. Guests are unfamiliar with the home, may not read house manuals, and will not know where a hidden key hangs. A keyless exit on every door guests use is the simpler, clearer setup, subject to your local rules and platform requirements.
For families, consider who actually uses each door. Toddlers, visiting grandparents, teenagers home alone and overnight guests all need to exit without a scavenger hunt for a key.
7 Critical Double Cylinder Deadbolt Mistakes to Avoid
- Installing one on the only exit from a bedroom area or the home.
- Keeping the inside key on the main key ring, so it leaves when the person who has it leaves.
- Hanging the key within reach of the glass, which defeats the purpose of the double cylinder deadbolt.
- Skipping the rules check with the building or fire official, the lease or the HOA.
- Ignoring the frame: a weak jamb fails long before the cylinder does.
- Not telling guests, sitters or caregivers how the door opens from inside.
- Mixing key systems so the inside cylinder needs a different key from the outside one.
What You Can Check Yourself vs What Needs a Locksmith
| You can safely check | Better left to a locksmith |
|---|---|
| If your deadbolt has a key cylinder or thumbturn inside | Converting a double cylinder deadbolt to single cylinder or the reverse |
| How far glass sits from the lock | Choosing a lockable thumbturn model that fits the door prep |
| If one key works both sides | Keying both cylinders to match your other locks |
| Bolt sticking in summer heat | Adjusting the strike or bolt alignment after door movement |
| Loose trim screws | Installing a reinforced strike or new deadbolt |
Doors swell and shift during monsoon humidity and summer heat, which can make any deadbolt drag. If yours sticks, see our article on why door locks stick in Phoenix heat before replacing hardware. When you are ready to change the lock itself, our door lock and bolt hardware installation service handles conversions and new deadbolts, and front entry upgrades are covered under front door lock installation.
Heat, dust and a double cylinder deadbolt
A double cylinder deadbolt has two keyways exposed to the environment instead of one, although the inside cylinder is sheltered. On sun-facing west Phoenix doors, metal expands and fine monsoon dust works into the outside keyway. Oil-based sprays tend to collect that dust. A lubricant the lock manufacturer recommends, applied sparingly, and a yearly check of how smoothly both keys turn help keep the inside cylinder dependable for the day it is actually needed.
Example Scenario: A Sidelight Front Door
Example scenario (illustrative, not a company case): A Glendale homeowner has a front door with a tall glass sidelight a few inches from the deadbolt. A neighbor suggests a double cylinder deadbolt. The household includes a grandparent who sleeps in the front bedroom and two young kids.
After reading their HOA rules and calling the city to ask about local requirements, they decide against a double cylinder deadbolt on the main exit. Instead they apply security film to the sidelight, keep a single cylinder deadbolt with a reinforced strike, and add a matching key for the garage entry door. The front door stays easy to open from inside, and the reach-through risk is lower. Glendale residents can find local details on our Glendale locksmith page.
Double Cylinder Deadbolt FAQ
Is a double cylinder deadbolt illegal in Arizona?
There is no simple statewide yes or no. Requirements come from the building and fire codes each city adopts, local amendments, the type of occupancy and sometimes lease or HOA rules. Ask your local building or fire official how a double cylinder deadbolt is treated for your specific home and door before installing one.
Can I convert my existing deadbolt to a double cylinder?
Sometimes. Some product lines offer interior cylinder kits, while others require replacing the whole deadbolt. The door bore, backset and thickness all matter. A locksmith can identify your model, check the door prep and tell you which option fits, after you have confirmed local rules allow the change.
Can both sides use the same key?
Yes, and they should. Most double cylinder deadbolts are sold keyed alike on both sides, and a locksmith can key them to match your other doors. Using two different keys for one door adds confusion and slows anyone trying to get out.
Does a double cylinder deadbolt stop all break-ins?
No lock does. It removes one specific risk: breaking glass and reaching the thumbturn. Many forced entries attack the frame, a slider or a window instead. Strike reinforcement, solid doors, good lighting and secure secondary doors usually matter as much as the cylinder style.
Where should I keep the inside key?
Somewhere fixed, visible to household members, near the door, and well beyond arm’s reach of any glass. A small hook on the wall several feet from the door frame is a common approach. The key should never be removed for daily use, and everyone, including guests, should know where it is.
Is security film really effective on sidelights?
Properly installed security film holds broken glass together and makes a clean reach-through hole much harder, which buys time and makes noise. It does not make glass unbreakable. Film quality and anchoring vary, and in Arizona heat you should choose a product rated for high UV and temperature exposure.
Should a landlord remove a double cylinder deadbolt between tenants?
It is worth reviewing at every turnover. Check local requirements and your lease templates, and consider swapping to a single cylinder or lockable thumbturn. At minimum, tell new tenants how the lock works in writing. Landlords should keep records of which units have which hardware.
Do double cylinder deadbolts cost more?
They are often priced a little higher than the matching single cylinder model because of the second cylinder, and keying both sides adds labor. Total cost depends on the brand, grade, finish and whether the door needs strike or frame work. A locksmith can give a quote after seeing the door.
What is a captured-key deadbolt?
It is a deadbolt with an inside thumbturn that can be locked, or in some designs removed, using a key. Day to day it behaves like a single cylinder lock. When the home is empty, locking the thumbturn reduces reach-through risk. Features and names vary by manufacturer, and local acceptance should be verified.
Can a locksmith help me decide?
Yes. A locksmith can look at the door, the glass, the frame and how your household uses that entry, then explain the trade-offs among cylinder types and alternatives. They can also point out frame or strike problems you may not see. Code questions still go to your local official.
Final Thoughts
A double cylinder deadbolt solves one problem well: glass within reach of a thumbturn. It also creates a real exit concern, so it belongs only where local rules allow it, nobody depends on that door as their sole way out, and the household will keep the key routine for years.
For many West Valley homes, upgrading the glass, choosing a lockable thumbturn and reinforcing the strike give similar protection with an easier exit. Take the time to compare, verify the rules locally, and choose the option your whole household can live with.
Weighing a double cylinder deadbolt for a door with glass?
Call West Phoenix Locksmith at (623) 258-4648 or use the Contact page to talk through the door and the options that fit it.
Written by [AUTHOR PENDING: West Phoenix Locksmith team]. Reviewed for technical accuracy by [REVIEWER PENDING]. Published November 3, 2026. Sources: manufacturer and primary references linked in the article. AI-assisted draft reviewed by a human editor before publication.

