¿How to Open a Lock Box?

how to open a lock box

Knowing how to open a lock box can come in handy in various situations. Perhaps you need to access important documents, and the key to the lockbox is lost. Or maybe you’ve inherited a lock box from a relative and don’t know the combination.

Whatever the case may be, opening a lock box is not as difficult as you might think, specially if it’s not high-quality lock box. With the right tools, you can open the lockbox in no time, and here we will show you how to do it!

How to Open a Lock Box in 3 easy steps


The first thing you’ll need to do is gather the right tools. For this job, you’ll need a screwdriver, a paperclip, and a hammer. The screwdriver will remove the screws on the back of the lockbox, while the paper clip will be used to pick the lock. The hammer will be used to break open the lock box, but we’ll get to that later.

Once you have your tools gathered, it’s time to get started. Begin by removing the screws on the back of the lock box with your screwdriver. Once all the screws have been removed, carefully lift off the back panel of the lock box.

Inside, you should see a series of small pins that make up the locking mechanism. Using your paperclip, attempt to push each pin up until it clicks into place. If done correctly, this should cause the lock to spring open. If not, don’t worry; we still have one more method to try.

Take your hammer and gently tap around the perimeter of the lock box until you find the spot where the lock’s body and the locking mechanism meet. Once you’ve found that spot, give it a few good whacks with your hammer until the lock’s body falls out, then you will have to carefully open the box and get the keys out.


This should be a very easy thing to do, if nothing of this works, try calling a 24 hour locksmith in Phoenix AZ for help, you will get back your keys for sure!

Share This Post

Contact Us

Phone:

(623) 258-4648

Email:

info@westphoenix-locksmith.com

Address:

7850 W McDowell Rd, Phoenix, AZ

More To Explore