How to Program Schlage Lock

How to Program Schlage Lock


This blog post will show you how to program Schlage lock. We’ll go over what you need to know before you start, how to get started, and what to do if you run into any problems. By the end of this post, you’ll be able to program your Schlage lock like a pro!


Before You Start


There are a few things you’ll need before you start programming your Schlage lock. First, you’ll need the programming code that came with your lock. This can usually be found on the back of the instructions that came with your lock. If you can’t find it there, check the sticker inside the battery cover.

You will also need the programming code; this is on a label on the back of the lock or inside the box; this is not the code you use to open your door; it is a different code.

Now that you have everything you need let’s get started!

How to Program Schlage Lock: 5 Easy Steps

  1. Turn your lock into programming mode by introducing the programming code.
  2. Once you have entered it, the light on the front of the lock should blink twice and turn orange. Then you have to press the Schlage button and after that press the number 3.
  3. Enter your new code using the keypad on the front of the lock. It will beep three times.
  4. After you hear the three beeps, re-enter the new code to confirm.
  5. If you have done it correctly, you should hear a long beep, and that’s it!

What to Do if You Run Into Problems


If you’re having trouble programming your Schlage lock, there are a few things you can try. First, make sure you’re using a fresh 9-volt battery—a weak battery can cause all sorts of problems.

Next, double-check that you’re entering your programming code correctly. If everything looks good there, try pressing and holding the reset button for 10 seconds instead of 5 seconds—sometimes, that extra time is all it takes!

Lastly, if none of these solutions work, contact customer support for assistance. They should be able to help you troubleshoot your specific issue so that you can get your Schlage lock up and running in no time!

If nothing of these tips works, you can rely on our locksmith near Phoenix AZ to program your Schlage lock in a few minutes.

This blog post has covered everything you need to know about how to program Schlage lock. We’ve covered what you need before you start, how to get started, and what to do if things don’t go as planned.

By following these simple instructions, you’ll be able to program your Schlage lock like a pro in no time!

Share This Post

Contact Us

Phone:

(623) 258-4648

Email:

info@westphoenix-locksmith.com

Address:

7850 W McDowell Rd, Phoenix, AZ

More To Explore